Shock-Free Antistatic Floor Finish is water-based floor finish that can be applied to various hard and soft flooring to quickly dissipate electrostatic and form a clear, glossy and abrasion resistant Protective Film on the floor. Shock-Free Antistatic Floor Finish will dry within 1 to 2 hours, and it can be used in clean room, electronic production plants, assembly and test areas under a relative humidity of 30% to 70%.
(1) Quickly dissipate electrostatic charge (2) Dry bright with high gloss (3) Abrasion resistance (4) Gentle odor and safe (5) Water-based formula
(1) Clean the floor and remove the Wax with stripper - NS2 wax stripper is recommended. (2) After wetting and washing, use water to make sure there is no residue of wax remover. (3) Apply the Shock-Free Antistatic Floor Finish with flat mop. (4) Allow 1 to 2 hours to dry. The second layer can be applied in a completely dry place. (5) The waxed floor needs to be grounded to dissipate electrostatic swiftly.
Get A Free Sample!
Fill in your details below to receive a free sample of our Floor Finish.
Contact us if you need more details on Anti-static Floor Polish. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Anti-static Floor Polish、Anti-static Floor Polish. If these products fail to match your need, please contact us and we would like to provide relevant information.